7315 飞机机械师和飞机检查员 Aircraft mechanics and aircraft inspectors NOC - LEVEL B
飞机机械师维护，修理，大修，修改和测试飞机的结构，机械和液压系统。飞机检查员检查飞机和飞机系统制造，改装，维修，维修或大修情况。飞机机械师和飞机检查员受雇于飞机制造，维护，修理和大修机构，航空公司和其他飞机运营商。
Aircraft mechanics maintain, repair, overhaul, modify and test aircraft structural, mechanical and hydraulic systems. Aircraft inspectors inspect aircraft and aircraft systems following manufacture, modification, maintenance, repair or overhaul. Aircraft mechanics and aircraft inspectors are employed by aircraft manufacturing, maintenance, repair and overhaul establishments, and by airlines and other aircraft operators.
7315 飞机机械师和飞机检查员头衔范例
飞机的燃气涡轮发动机的技术人员 aircraft gas turbine engine technician
飞机检查员 aircraft inspector
飞机维修工程师AME航空电子设备除外 aircraft maintenance engineer (AME) (except avionics)
航空机械员 aircraft mechanic
飞机结构维修技术员 aircraft structural repair technician
飞机系统巡视员 aircraft systems inspector
航空机械部件车间技术员 aviation mechanical component shop technician
认证的飞机技师 certified aircraft technician
液压机械师，飞机 hydraulic mechanic, aircraft
检查员，飞行试验 inspector, flight test
检查员，修理和大修 inspector, repair and overhaul
检查员，飞机维修铺 shop inspector, aircraft repair
7315 飞机机械师和飞机检查员主要职责
飞机机械师执行部分或全部下列职责：Aircraft mechanics perform some or all of the following duties:
飞机结构，机械或液压系统故障排除，根据规格，技术图纸，手册和既定的程序，找出问题，调整和修复系统，
Troubleshoot aircraft structural, mechanical or hydraulic systems to identify problems and adjust and repair systems according to specifications, technical drawings, manuals and established procedures
修理和大修飞机的结构，机械或液压系统
Repair and overhaul aircraft structural, mechanical or hydraulic systems
安装或修改飞机发动机，机械，液压，飞行控制，燃油和气动系统
Install or modify aircraft engines and mechanical, hydraulic, flight control, fuel and pneumatic systems
拆除机体，飞机引擎或其他飞机系统进行维修，检修和清洗，并重组
Dismantle airframes, aircraft engines or other aircraft systems for repair, overhaul and cleaning, and reassemble
执行和记录日常维护
Perform and document routine maintenance
订购和保管库存配件及耗材。
Order and maintain inventory of parts and supplies.
飞机检查员执行部分或全部下列职责Aircraft inspectors perform some or all of the following duties:
检查飞机的结构和机械系统，并确保这些系统符合加拿大运输部和公司的性能和安全性标准
Inspect structural and mechanical systems of aircraft and ensure that these systems meet Transport Canada and company standards of performance and safety
检查飞机机械师进行维护，修理和大修或改装飞机和飞机机械系统的工作，以确保遵守标准和程序
Inspect work of aircraft mechanics performing maintenance, repair and overhaul, or modification of aircraft and aircraft mechanical systems to ensure adherence to standards and procedures
保留详细的维修，检验和认证的记录和报告。
Maintain detailed repair, inspection and certification records and reports.
飞机机械师通常专注于特定的飞机系统，如发动机，发动机配件，机身，螺旋桨，组件或机械液压系统和特定种类的飞机，轻型飞机，喷气运输机和直升机等工作。
Aircraft mechanics usually specialize in working on specific aircraft systems such as engines, engine accessories, airframes, propellers, mechanical components or hydraulic systems and specific kinds of aircraft, such as light aircraft, jet transports and helicopters.
7315 飞机机械师和飞机检查员任职要求
必需完成中学学业。
Completion of secondary school is required.
具备飞机维修大专文凭
A college diploma in aircraft maintenance
或者通常需要完成为期四年的学徒计划。
Completion of a four-year apprenticeship program is usually required.
飞机机械师要求多年的在职培训。
Several years of on-the-job training are required for aircraft mechanics.
签署维护版本和证明适航的飞机机械师和检查员要求具备由加拿大运输部颁发的飞机维修工程师AME许可证。
Aircraft mechanics and inspectors who sign maintenance releases and certify airworthiness require an Aircraft Maintenance Engineers (AME) licence issued by Transport Canada.
飞机维修工程师行业认证是可用的，而在安大略省，西北地区和努纳武特地区是自愿的。
Trade certification for aircraft maintenance engineers is available, but voluntary, in Ontario, the Northwest Territories and Nunavut.
飞机结构技师行业认证是可用的，而在不列颠哥伦比亚省是自愿的。
Trade certification for aircraft structural technicians is available, but voluntary, in British Columbia.
本单元组的来自加拿大的航空维修协会的某些职业的行业认证是可用的，但是自愿的。
Industry certification from the Canadian Aviation Maintenance Council for some occupations in this unit group is available, but voluntary.
飞机检查员必须是具备多年的经验飞机机械师。
Aircraft inspectors require several years of experience as an aircraft mechanic.
7315 飞机机械师和飞机检查员附加信息
飞机机械师可能晋升为领班/男/女，行业主管或飞机检查检查员。
Aircraft mechanics may progress to foreman/woman, shop supervisor or aircraft inspector.
随着经验的积累，飞机检查员可能晋升到行业检查员或主管。
With experience, aircraft inspectors may progress to shop inspector or supervisor.
飞机机械师和检查员可以获取进一步的签注飞机维修工程师AME许可证，允许他们对更大范围的飞机和飞机系统进行检查和认证。
Aircraft mechanics and inspectors may acquire further endorsements to their AME licence allowing them to inspect and certify a broader range of aircraft and aircraft systems.
AME执照分为以下类别：M - 小型和大型飞机，E - 电子系统，S - 飞机结构.
AME licences are issued in the following categories: M – Small and Large Aircraft, E – Electronic Systems, S – Aircraft Structures.
7315 飞机机械师和飞机检查员其他分类
飞机装配工和飞机装配检查员 Aircraft assemblers and aircraft assembly inspectors [9521](9521)
飞机引擎钳工和装配工机械钳工Aircraft engine fitters and assemblers (in [7316](7316) Machine fitters )
飞机仪表，电气和航空电子设备技工，技师和检查员 Aircraft instrument, electrical and avionics mechanics, technicians and inspectors [2244](2244)
飞机无损检测技术人员非破坏性的测试人员和检验技术人员Aircraft non-destructive inspection technicians (in [2261](2261) Non-destructive testers and inspection technicians )
政府适航检查员工程检查员和管理人员Government airworthiness inspectors (in [2262](2262)Engineering inspectors and regulatory officers )
主管飞机机械师和飞机检查员承包商及主管，机械行业Supervisors of aircraft mechanics and aircraft inspectors (in [7301](7301) Contractors and supervisors, mechanic trades )
7315 飞机机械师和飞机检查员职称头衔
配件检修机械师，飞机 accessories overhaul mechanic, aircraft
配件检修技术员，飞机 accessories overhaul technician, aircraft
航空发动机机械师 aero-engine mechanic
航空发动机技术人员 aero-engine technician
飞机配件技工 aircraft accessories mechanic
飞机配件大修技工 aircraft accessories overhaul mechanic
飞机配件修理工 aircraft accessories repairer
飞机配件修理工/男/女 aircraft accessories repairman/woman
机身修理工 aircraft body repairer
飞机复合材料和金属板材修理工 aircraft composite and sheet metal repairer
飞机引擎检查员 aircraft engine inspector
飞机引擎机械师 aircraft engine mechanic
飞机发动机机械系统技术人员 aircraft engine mechanical systems technician
飞机发动机大修检查员 aircraft engine overhaul inspector
飞机发动机大修检查员，机械系统 aircraft engine overhaul inspector, mechanical systems
飞机发动机大修技工 aircraft engine overhaul mechanic
飞机发动机维修和大修技工 aircraft engine repair and overhaul mechanic
飞机引擎测试员 aircraft engine tester
飞机的燃气涡轮发动机的技术人员 aircraft gas turbine engine technician
飞机液压巡视员 aircraft hydraulics inspector
飞机液压技工 aircraft hydraulics mechanic
飞机液压车间技术员 aircraft hydraulics shop technician
飞机液压系统技术员 aircraft hydraulics technician
飞机液压测试仪 aircraft hydraulics tester
飞机检查员 aircraft inspector
飞机检查员，机械系统 aircraft inspector, mechanical systems
飞机维修工程师AME航空电子设备除外 aircraft maintenance engineer (AME) (except avionics)
飞机维修工程师AME，机械系统 aircraft maintenance engineer (AME), mechanical systems
飞机维修工程师AME，旋翼机 aircraft maintenance engineer (AME), rotorcraft
飞机维修工程师AME，结构 aircraft maintenance engineer (AME), structures
飞机维修工程师航空电子设备除外 aircraft maintenance engineer (except avionics)
飞机维修技工学徒 aircraft maintenance mechanic apprentice
飞机维修技术员 aircraft maintenance technician
航空机械员 aircraft mechanic
飞机机械师实验 aircraft mechanic experimental
飞机机械师学习者 aircraft mechanic learner
飞机机械师，发动机配件检修 aircraft mechanic, engine accessories overhaul
飞机机械师，发动机大修 aircraft mechanic, engine overhaul
飞机机械师，飞行测试 aircraft mechanic, flight tests
飞机机械师，机械系统 aircraft mechanic, mechanical systems
飞机机械师，电厂 aircraft mechanic, power plant
飞机机械系统和燃油系统大修和修理技工 aircraft mechanical and fuel systems overhaul and repair mechanic
飞机机械系统检查员 aircraft mechanical systems inspector
飞机机械系统技工 aircraft mechanical systems mechanic
飞机机械系统预检技工 aircraft mechanical systems preflight mechanic
飞机机械系统的维修检查 aircraft mechanical systems repair inspector
飞机机械系统的维修店检查 aircraft mechanical systems repair shop inspector
飞机机械系统技术员 aircraft mechanical systems technician
飞机液压管道和机械师 aircraft plumbing and hydraulics mechanic
飞机螺旋桨系统技术员 aircraft propeller systems technician
飞机往复式发动机技师 aircraft reciprocating engine technician
飞机维修和大修检查员 aircraft repair and overhaul inspector
飞机维修店检查 aircraft repair shop inspector
飞机安全系统技工 aircraft safety systems mechanic
飞机钣金技师 aircraft sheet metal technician
飞机蒙皮修理工 aircraft skin repairer
飞机结构维修技术员 aircraft structural repair technician
飞机结构的技术人员 aircraft structural technician
飞机系统巡视员 aircraft systems inspector
飞机技师，配件检修 aircraft technician, accessories overhaul
飞机技术员，燃气涡轮发动机 aircraft technician, gas turbine engines
飞机技师，机械系统 aircraft technician, mechanical systems
飞机技术员，螺旋桨系统 aircraft technician, propeller systems
飞机技师，推进 aircraft technician, propulsion
机身技工 airframe mechanic
的AME飞机维修工程师航空电子设备除外 AME (aircraft maintenance engineer) (except avionics)
飞机维修工程师AME，机械系统 AME (aircraft maintenance engineer), mechanical systems
飞机维修工程师AME，旋翼机 AME (aircraft maintenance engineer), rotorcraft
飞机维修工程师AME，结构 AME (aircraft maintenance engineer), structures
学徒飞机维修工程师AME apprentice aircraft maintenance engineer (AME)
学徒飞机机械师，机械系统 apprentice aircraft mechanic, mechanical systems
学徒飞机机械系统技工 apprentice aircraft mechanical systems mechanic
学徒AME飞机维修工程师 apprentice AME (aircraft maintenance engineer)
航空维修检查员 aviation maintenance inspector
航空机械部件车间技术员 aviation mechanical component shop technician
认证的飞机技师 certified aircraft technician
复合材料和金属片修理工，飞机 composite and sheet metal repairer, aircraft
复合材料修理技师 composite repair technician
发动机配件大修技工 engine accessories overhaul mechanic
发动机检查员，飞机 engine inspector, aircraft
发动机机械师，飞机 engine mechanic, aircraft
发动机大修检查员，飞机的机械系统 engine overhaul inspector, aircraft mechanical systems
发动机大修机械师，飞机 engine overhaul mechanic, aircraft
发动机维修和大修机械师，飞机 engine repair and overhaul mechanic, aircraft
发动机综合测试仪，飞机 engine tester, aircraft
实验飞机机械师 experimental aircraft mechanic
飞行线路修理工 flight line mechanic
飞行试验检查员 flight test inspector
飞行试验检查，机械系统 flight test inspector, mechanical systems
飞行试验机械师，飞机 flight test mechanic, aircraft
燃气涡轮发动机的技工 gas turbine engine mechanic
直升机巡视员，机械系统 helicopter inspector, mechanical systems
直升机机械师 helicopter mechanic
液压机械师，飞机 hydraulic mechanic, aircraft
液压巡视员，飞机 hydraulics inspector, aircraft
液压车间技术员，飞机 hydraulics shop technician, aircraft
液压技术人员，飞机 hydraulics technician, aircraft
液压测试员，飞机 hydraulics tester, aircraft
检查员，飞机 inspector, aircraft
检查员，飞机发动机大修 inspector, aircraft engine overhaul
检查员，飞机发动机 inspector, aircraft engines
检查员，飞机机械系统 inspector, aircraft mechanical systems
检查员，飞机机械系统飞行试验 inspector, aircraft mechanical systems flight tests
检查员，飞机机械系统维修 inspector, aircraft mechanical systems repair
检查员，飞机机械系统的维修店 inspector, aircraft mechanical systems repair shop
检查员，飞机系统 inspector, aircraft systems
检查员，航空维修 inspector, aviation maintenance
检查员，飞行试验 inspector, flight test
检查员，修理和大修 inspector, repair and overhaul
初级技工，飞机机械系统 junior mechanic, aircraft mechanical systems
维修工程师，飞机机械系统 maintenance engineer, aircraft mechanical systems
维修技师，飞机 maintenance technician, aircraft
机械师，飞机 mechanic, aircraft
机械师，飞机发动机大修 mechanic, aircraft engine overhaul
机械师，飞机发动机维修和大修 mechanic, aircraft engine repair and overhaul
机械师，飞机发动机 mechanic, aircraft engines
机械师，飞机机械系统 mechanic, aircraft mechanical systems
机械师，机身 mechanic, airframes
修理工，燃气涡轮发动机 mechanic, gas turbine engines
机械师，预检 mechanic, preflight
机械和燃油系统大修和修理技工，飞机 mechanical and fuel systems overhaul and repair mechanic, aircraft
机械系统检查，飞机维修和大修 mechanical systems inspector, aircraft repair and overhaul
修改机械师，飞机机械系统 modification mechanic, aircraft mechanical systems
电厂机械师，飞机 power plant mechanic, aircraft
预检技工 preflight mechanic
预检机械师，机械系统 preflight mechanic, mechanical systems
飞机螺旋桨巡视员， propeller inspector, aircraft
推进技师 propulsion technician
修理工，飞机配件 repairer, aircraft accessories
修理工，飞机机构 repairer, aircraft bodies
修理工，飞机蒙皮 repairer, aircraft skins
修理工/男/女，飞机配件 repairman/woman, aircraft accessories
旋转技术人员，飞机的机械系统 rotary technician, aircraft mechanical systems
旋翼机维修工程师 rotorcraft maintenance engineer
旋翼机的机械系统技术员 rotorcraft mechanical systems technician
安全系统机械师，飞机 safety systems mechanic, aircraft
钣金技师，飞机 sheet metal technician, aircraft
飞机机械系统的维修店检查员， shop inspector, aircraft mechanical systems repair
检查员，飞机维修铺 shop inspector, aircraft repair
车间技术员，飞机液压 shop technician, aircraft hydraulics
车间技术员，航空机械部件 shop technician, aviation mechanical components
结构修理技师 structural repair technician
结构技师，飞机 structure technician, aircraft
结构机械师 structures mechanic
技术人员，飞机发动机 technician, aircraft engines
技术人员，飞机燃气涡轮发动机 technician, aircraft gas turbine engines
技术员，飞机液压店 technician, aircraft hydraulics shop
技术员，飞机机械系统 technician, aircraft mechanical systems
技术员，飞机螺旋桨系统 technician, aircraft propeller systems
技术员，飞机往复式发动机 technician, aircraft reciprocating engines
技术员，飞机结构修理 technician, aircraft structural repair
技术员，复合材料修理 technician, composite repair
技术员，推进 technician, propulsion
技术员，旋翼机的机械系统 technician, rotorcraft mechanical systems
技术员，结构维修 technician, structural repair
加拿大BC省提名技术移民项目（PNP）是由BC省政府和联邦移民部协议共同运作的移民项目，旨在帮助BC省的雇主雇用并保留拥有所需技能的合资格的外国技术工人。
对于雇主：
1、企业必须注册在BC省范围内，经营一年以上并运营良好；
2、企业如位于大温哥华都会地区以内，必须拥有5名或以上的全职员工；
3、企业如位于大温哥华都会地区以外，必须拥有3名或以上的全职员工。
对于申请人要求：
1、必须具备大专以上学历；
2、满足雇主的招聘要求，多年相关行业工作经验；
3、如果雇主的行业需要具备相应的职业证书，则需提供；
4、具备一定的英文能力，雅思成绩须在5分以上；
5、需拥有足够第一年定居加拿大所需的全家生活费用。
扩展阅读
9521 飞机装配员和飞机装配检查员 Aircraft assemblers and aircraft assembly inspectors NOC - LEVEL C
飞机装配员组装，调试和安装预制件，制造固定翼或旋转翼飞机或飞机组件。飞机装配检查员检查飞机组件确保遵守施工规范。他们受雇于飞机和飞机组件制造商。
Aircraft assemblers assemble, fit and install prefabricated parts to manufacture fixed wing or rotary wing aircraft or aircraft subassemblies. Aircraft assembly inspectors inspect aircraft assemblies for adherence to engineering specifications. They are employed by aircraft and aircraft subassembly manufacturers.
9521 飞机装配员和飞机装配检查员头衔范例
飞机装配员 aircraft assembler
飞机检查员，装配 aircraft inspector, assembly
机身装配员 airframe assembler
工作台和结构装配员 bench and structural assembler
工作台钳工技师 - 飞机总装 bench fitter mechanic – aircraft assembly
装配工 - 飞机总装 rigger – aircraft assembly
机翼油箱机械师 - 飞机总装 wing tank mechanic – aircraft assembly
9521 飞机装配员和飞机装配检查员主要职责
飞机装配工执行部分或全部下列职责Aircraft assemblers perform some or all of the following duties:
阅读和解释飞机总装图
Read and interpret aircraft assembly diagrams
在工作台或直接在飞机结构上组装和调试预制部件，形成组件
Assemble and fit pre-fabricated parts to form subassemblies, working at benches or directly on an aircraft structure
组装，调试和安装预制部件和组件，如飞机蒙皮，飞行控制器，传动装置，液压装置和其他各种机械系统。
Assemble, fit and install pre-fabricated parts and subassemblies such as aircraft skins, flight controls, rigging, hydraulics and other mechanical systems.
飞机装配检查员执行部分或全部下列职责Aircraft assembly inspectors perform some or all of the following duties:
使用测量和检测设备，检查飞机组件，确保符合工程规范
Inspect aircraft assemblies, using measuring and testing equipment, for adherence to engineering specifications
检查组件确保对齐，对称，尺寸，装配和做工质量
Inspect assemblies for alignment, symmetry, dimensions, fit and quality of workmanship
完成详细检查文档。
Complete detailed inspection documentation.
9521 飞机装配员和飞机装配检查员任职要求
必需完成中学。
Completion of secondary school is required.
可能要求完成大学或航空航天技术其他课程，重点是飞机制造。
Completion of a college or other program in aviation or aeronautical technology, with emphasis in aircraft manufacturing, may be required.
飞机装配工接受多个月的在职和课堂培训。
Aircraft assemblers receive several months of on-the-job and classroom training.
飞机装配检查员需要飞机组装员的经验。
Aircraft assembly inspectors require experience as an aircraft assembler.
9521 飞机装配员和飞机装配检查员附加信息
随着经验积累，飞机装配工和组装检查员可晋升到主管职位。
Aircraft assemblers and assembly inspectors may progress to supervisory positions with experience.
9521 飞机装配员和飞机装配检查员其他分类
飞机发动机装配工（ 机械钳工） Aircraft engine assemblers (in [7316](7316) Machine fitters )
飞机机械师和飞机检查员 Aircraft mechanics and aircraft inspectors [7315](7315)
飞机画家（ 工业画家，镀膜机，金属整理过程中运营商） Aircraft painters (in [9536](9536) Industrial painters, coaters and metal finishing process operators )
航空电子设备和飞机的电子设备安装工（ 飞机仪表，电气和航空电子设备技工，技师和检查员） Avionics and aircraft electronic equipment installers (in [2244](2244) Aircraft instrument, electrical and avionics mechanics, technicians and inspectors )
主管飞机装配检查员（ 主管，其他机械和金属制品制造业） Supervisors of aircraft assemblers or inspectors (in [9226](9226) Supervisors, other mechanical and metal products manufacturing )
9521 飞机装配员和飞机装配检查员职称头衔
副翼钳工 - 飞机总装 aileron fitter – aircraft assembly
飞机装配员 aircraft assembler
飞机装配检查员 aircraft assembly inspector
飞机组装装配工 aircraft assembly rigger
飞机工作台装配员 aircraft bench assembler
飞机制造巡视员 aircraft fabrication inspector
飞机最终组装检查员 aircraft final assembly inspector
飞机钳工装配员 - 飞机总装 aircraft fitter-assembler – aircraft assembly
飞机检查员，装配工和安装工 aircraft inspector, assemblies and installations
飞机检查员，装配 aircraft inspector, assembly
飞机零件钳工 - 飞机总装 aircraft parts fitter – aircraft assembly
飞机的动力装置安装装配员 aircraft power plant assembler-installer
飞机装配工 - 飞机总装 aircraft rigger – aircraft assembly
飞机操纵和控制机械师 - 飞机总装 aircraft rigging and controls mechanic – aircraft assembly
飞机封口工 - 飞机总装 aircraft sealer – aircraft assembly
飞机结构和表面装配员 aircraft structure and surface assembler
飞机结构装配员 aircraft structure assembler
飞机测试员 - 飞机总装 aircraft tester – aircraft assembly
机身装配员 airframe assembler
机身装配员 - 飞机总装 airframe assembler – aircraft assembly
机身钳工 - 飞机总装 airframe fitter – aircraft assembly
机身组装工 airframe subassembler
机身单元装配员 airframe unit assembler
装配员，飞机 assembler, aircraft
装配员，飞机结构及表面 assembler, aircraft structures and surfaces
装配员，机身 - 飞机总装 assembler, airframes – aircraft assembly
装配员，电厂 - 飞机总装 assembler, power plants – aircraft assembly
飞机装配检查员 assembly inspector, aircraft
工作台和结构装配员 bench and structural assembler
工作台和结构装配员 - 飞机总装 bench and structural assembler – aircraft assembly
工作台装配员，飞机 bench assembler, aircraft
工作台钳工 - 飞机总装 bench fitter – aircraft assembly
工作台钳工技师 - 飞机总装 bench fitter mechanic – aircraft assembly
控制装配员，飞机 control assembler, aircraft
详细装配员 - 飞机总装 detail assembler – aircraft assembly
详细检查 - 飞机总装 detail inspector – aircraft assembly
发展技工 - 飞机总装 development mechanic – aircraft assembly
钻头和铰技工 - 飞机总装 drill and ream mechanic – aircraft assembly
织物安装维修工 - 飞机总装 fabric installer-repairer – aircraft assembly
总装检查员 - 飞机总装 final-assembly inspector – aircraft assembly
最终飞机装配检查员 final-assembly inspector, aircraft
钳工，副翼 - 飞机总装 fitter, ailerons – aircraft assembly
钳工，钳工 - 飞机总装 fitter, bench – aircraft assembly
钳工测试工，焊接总成 - 飞机总装 fitter-tester, welded assembly – aircraft assembly
机身装配员 fuselage assembler
机身钳工 - 飞机总装 fuselage fitter – aircraft assembly
液压装置 - 飞机总装 hydraulic installation – aircraft assembly
液压系统安装员 - 飞机总装 hydraulic system installer – aircraft assembly
检查员，飞机总装 inspector, aircraft assembly
检查员，飞机制造 inspector, aircraft fabrication
安装技工，发电厂 - 飞机总装 installation mechanic, power plants – aircraft assembly
安装，液压 - 飞机总装 installation, hydraulic – aircraft assembly
机械师，电厂安装 - 飞机总装 mechanic, power plant installation – aircraft assembly
机械师，翼结婚 - 飞机总装 mechanic, wing marry-up – aircraft assembly
机械师，机翼油箱 - 飞机总装 mechanic, wing tanks – aircraft assembly
电厂装配员 - 飞机总装 power plant assembler – aircraft assembly
电厂安装技工 - 飞机总装 power plant installation mechanic – aircraft assembly
电厂技工 - 飞机总装 power plant mechanic – aircraft assembly
压力室封口机和测试仪 - 飞机总装 pressure compartment sealer and tester – aircraft assembly
螺旋桨机械师 - 飞机总装 propeller mechanic – aircraft assembly
装配员 - 飞机总装 rigger – aircraft assembly
起重工机械师，飞机控制 rigger mechanic, aircraft controls
起重工，飞机 - 飞机总装 rigger, aircraft – aircraft assembly
起重工，飞机总装 rigger, aircraft assembly
封口工 - 飞机总装 sealer – aircraft assembly
封口工和测试员，加压舱 - 飞机总装 sealer and tester, pressurized compartments – aircraft assembly
封口工，飞机 - 飞机总装 sealer, aircraft – aircraft assembly
钣金装配员 - 飞机总装 sheet metal assembler – aircraft assembly
皮肤钳工 - 飞机总装 skin fitter – aircraft assembly
晶石装配员 - 飞机总装 spar assembler – aircraft assembly
结构装配员，工作台 - 飞机总装 structural assembler, bench – aircraft assembly
组装工 - 飞机总装 subassembler – aircraft assembly
焊接装配钳工测试仪 - 飞机总装 welded assemblies fitter-tester – aircraft assembly
翼装配员，飞机 wing assembler, aircraft
翼巡视员 - 飞机总装 wing inspector – aircraft assembly
联翼机械师 - 飞机总装 wing marry-up mechanic – aircraft assembly
机翼油箱机械师 - 飞机总装 wing tank mechanic – aircraft assembly
加拿大BC省提名技术移民项目（PNP）是由BC省政府和联邦移民部协议共同运作的移民项目，旨在帮助BC省的雇主雇用并保留拥有所需技能的合资格的外国技术工人。
对于雇主：
1、企业必须注册在BC省范围内，经营一年以上并运营良好；
2、企业如位于大温哥华都会地区以内，必须拥有5名或以上的全职员工；
3、企业如位于大温哥华都会地区以外，必须拥有3名或以上的全职员工。
对于申请人要求：
1、必须具备大专以上学历；
2、满足雇主的招聘要求，多年相关行业工作经验；
3、如果雇主的行业需要具备相应的职业证书，则需提供；
4、具备一定的英文能力，雅思成绩须在5分以上；
5、需拥有足够第一年定居加拿大所需的全家生活费用。
更多加拿大NOC职业列表
2264 建筑检查员 Construction inspectors NOC - LEVEL B
建筑检查员检查新建和现有建筑，桥梁，公路和工业建筑的建设和维护，以确保规范和建筑规范被检测，同时监测工作现场安全工作。他们受雇于联邦，省级和市级政府，建筑公司，建筑和民用工程咨询公司，或者他们可能成为自雇人士。
Construction inspectors inspect the construction and maintenance of new and existing buildings, bridges, highways and industrial construction to ensure that specifications and building codes are observed and monitor work site safety. They are employed by federal, provincial and municipal governments, construction companies, architectural and civil engineering consulting firms or they may be self-employed.
2264 建筑检查员头衔范例
桥梁检查员 bridge inspector
建筑检查员 building construction inspector
建设督察 construction inspector
公路建设督察 highway construction inspector
家庭督察 home inspector
住房建设督察 housing construction inspector
矿山督察，建设 mine inspector, construction
水暖督察 plumbing inspector
预应力混凝土督察 pre-stressed concrete inspector
安全人员 - 建设 safety officer – construction
2264 建筑检查员主要职责
为新建筑，建筑装修和其他提议结构检查计划，图纸和站点布局
Examine plans, drawings, and site layouts for new buildings, building renovations and other proposed structures
检查建筑，桥梁，水坝，公路和其他类型的建设和工程建设的施工情况，符合图纸，规范，建筑法规或其他适用法例
Inspect construction of buildings, bridges, dams, highways and other types of building and engineering construction for conformance to drawings, specifications, building codes or other applicable ordinances
检查和测试建筑物内电气或管道的安装，以确保符合市级，省级和联邦法规
Inspect and test electrical or plumbing installations in buildings to ensure compliance with municipal, provincial and federal regulations
检查钢框架，混凝土形式，钢筋网和棒，混凝土或预应力混凝土，以确保质量标准，并核实是否符合规范和建筑规范
Inspect steel framework, concrete forms, reinforcing steel mesh and rods, concrete or pre-stressed concrete to ensure quality standards and to verify conformance to specifications and building codes
检查下水道系统和管道建设
Inspect construction of sewer systems and pipelines
检查建筑工地，以保证安全的工作条件
Inspect construction sites to ensure that safe working conditions are maintained
检查现有的建筑，识别并报告结构缺陷，火灾和其他安全隐患
Inspect existing buildings to identify and report on structural defects, fire hazards and other threats to safety
代表客户检查新建或二手房，评估并提供物产状况报告。
Inspect new or resale homes on behalf of clients and assess and provide reports on the physical condition of property.
2264 建筑检查员任职要求
必需完成中学学习。
Completion of secondary school is required.
建筑，土木或建筑技术的大专文凭，同时具备多年的相关工作经验
A college diploma in construction, civil engineering or architectural technology plus several years of related work experience
或者必须具备多年的建筑行业，如管道，木工或电气行业技工工作经验。
Several years of experience as a qualified tradesperson in a construction trade, such as plumbing, carpentry or electrical trade are required.
通常需要熟练的省级行业认证，或工程技术专家认证。
Provincial certification in a skilled trade or as an engineering technologist is usually required.
具有由加拿大绿色建筑委员会提供的能源与环境设计（LEED）领导认证，同时有些雇主可能要求雇员具备该认证。
Leadership in Energy and Environmental Design (LEED) certification is offered by the Canada Green Building Council and may be required by some employers.
2264 建筑检查员附加信息
随着经验积累，可能晋升到建筑管理职位。
Progression to construction management positions is possible with experience.
2264 建筑检查员其他分类
执法及其他监管人员，NEC By-law enforcement and other regulatory officers, n.e.c. [4423](4423)
建筑估计师 Construction estimators [2234](2234)
建筑经理 Construction managers [0711](0711)
工程督察和监管人员 Engineering inspectors and regulatory officers [2262](2262)
公众和环境健康和职业健康安全督察 Inspectors in public and environmental health and occupational health and safety [2263](2263)
2264 建筑检查员职称头衔
锅炉安装检查员 boiler installation inspector
桥梁和建筑检查员 bridge and building inspector
桥梁检查员 bridge inspector
桥梁巡视员 - 建设和维护 bridge inspector – construction and maintenance
建筑检查员 building construction inspector
建筑检查员 building inspector
建筑检查员 - 电气布线 building inspector – electrical wiring
建筑检查员 - 结构 building inspector – structure
建筑安全督察 building safety inspector
加拿大按揭及房屋公司（CMHC）巡视员 Canada Mortgage and Housing Corporation (CMHC) inspector
木工督察 carpentry inspector
闭路电视下水道检查员 closed circuit TV sewer inspector
CMHC（加拿大按揭及房屋公司）巡视员 CMHC (Canada Mortgage and Housing Corporation) inspector
合规督察 - 建筑 compliance inspector – buildings
施工现场督察 construction field inspector
建设督察 construction inspector
建设检查和测试仪 construction inspector and tester
施工安全主任 construction safety officer
大坝建设督察 dam construction inspector
建设督察 ditch construction inspector
电能安装督察 electrical energy installation inspector
电气检查员 electrical inspector – construction
电气安装督察 electrical installation inspector
电气安全检查员 electrical safety inspector
电气布线检查员-建筑 electrical wiring inspector – construction
泡水检查 - 建筑工地 flood damage inspector – construction sites
建筑检查员 foreman/woman, building construction inspectors
公路建设督察 foreman/woman, highway construction inspectors
管道建设督察 foreman/woman, pipeline construction inspector
管道督察 foreman/woman, pipeline inspectors
公路建设督察 highway construction inspector
住房建设督察 home construction inspector
家庭督察 home inspector
住房建设督察 housing construction inspector
住房康复巡视员 housing rehabilitation inspector
工业施工安全检查 industrial construction safety inspector
工业电气安装督察 industrial electric installation inspector
督察人员和测试人员，建设 inspector and tester, construction
督察，锅炉安装 inspector, boiler installation
巡视员，桥梁 inspector, bridges
巡视员，桥梁 - 建设和维护 inspector, bridges – construction and maintenance
督察，桥梁和建筑物 inspector, bridges and buildings
督察，建筑 inspector, building construction
检查员，楼宇安全 inspector, building safety
督察，建筑物 inspector, buildings
督察，建筑物 - 电气布线 inspector, buildings – electrical wiring
督察，建筑 - 结构 inspector, buildings – structure
检查员，加拿大按揭及房屋公司（CMHC） inspector, Canada Mortgage and Housing Corporation (CMHC)
巡视员，CMHC（加拿大按揭及房屋公司） inspector, CMHC (Canada Mortgage and Housing Corporation)
督察，合规性 - 建筑 inspector, compliance – buildings
检查员，施工 inspector, construction
督察，建筑领域 inspector, construction fields
督察，大坝建设 inspector, dam construction
检查员，沟建设 inspector, ditch construction
督察，安装电能 inspector, electrical energy installation
检查员，电气安装 inspector, electrical installation
检查员，电气安全 inspector, electrical safety
督察，电气布线 - 建设 inspector, electrical wiring – construction
督察，公路建设; inspector, highway construction
督察，家乡建设 inspector, home construction
检查员，家庭 inspector, homes
巡视员，住房建设; inspector, housing construction
巡视员，住房康复 inspector, housing rehabilitation
督察，工业建筑施工安全 inspector, industrial construction safety
检查员，工业电气设备 inspector, industrial electric installations
督察，建设灌溉 - inspector, irrigation – construction
督察，维护 - 建设 inspector, maintenance – construction
巡视员，砖石 inspector, masonry
检查员，矿山建设 inspector, mine construction
督察，管道建设 inspector, pipeline construction
检查员，水暖 inspector, plumbing
检查员，预应力混凝土 inspector, pre-stressed concrete
督察，公共工程 - 建设 inspector, public works – construction
检查员，炼油设备 inspector, refinery equipment
检查员，钢筋混凝土 inspector, reinforced concrete
督察，道路建设 inspector, road construction
督察，道路分级 inspector, road grading
检查员，铺路 inspector, road paving
督察，下水道建设 inspector, sewer construction
督察，结构铁工 inspector, structural ironwork
检查员，结构钢 inspector, structural steel
检查员，隧道施工; inspector, tunnel construction
检查员，水务建设 inspector, waterworks construction
督察，接线 - 国内安装 inspector, wiring – domestic installation
督察，接线 - 工业安装 inspector, wiring – industrial installation
灌溉督察 - 建设 irrigation inspector – construction
维修检查员 - 建设 maintenance inspector – construction
砌筑巡视员 masonry inspector
矿山建设督察 mine construction inspector
矿山督察，建设 mine inspector, construction
管道建设督察 pipeline construction inspector
水暖督察 plumbing inspector
预应力混凝土督察 pre-stressed concrete inspector
公共工程督察 - 建设 public works inspector – construction
炼油厂设备检查 refinery equipment inspector
钢筋混凝土督察 reinforced concrete inspector
公路建设督察 road construction inspector
道路分级督察 road grading inspector
铺路督察 road paving inspector
安全人员 - 建设 safety officer – construction
砂石检查员 - 建设 sand and gravel inspector – construction
下水道建设督察 sewer construction inspector
下水道督察，闭路电视 sewer inspector, closed circuit TV
土壤检查员 - 建设 soil inspector – construction
结构铁工检查 structural ironwork inspector
钢结构督察 structural steel inspector
主管，建设督察 supervisor, construction inspectors
隧道施工督察 tunnel construction inspector
水厂建设督察 waterworks construction inspector
接线检查 - 国内安装 wiring inspector – domestic installation
接线检查 - 工业安装 wiring inspector – industrial installation
加拿大BC省提名技术移民项目（PNP）是由BC省政府和联邦移民部协议共同运作的移民项目，旨在帮助BC省的雇主雇用并保留拥有所需技能的合资格的外国技术工人。
对于雇主：
1、企业必须注册在BC省范围内，经营一年以上并运营良好；
2、企业如位于大温哥华都会地区以内，必须拥有5名或以上的全职员工；
3、企业如位于大温哥华都会地区以外，必须拥有3名或以上的全职员工。
对于申请人要求：
1、必须具备大专以上学历；
2、满足雇主的招聘要求，多年相关行业工作经验；
3、如果雇主的行业需要具备相应的职业证书，则需提供；
4、具备一定的英文能力，雅思成绩须在5分以上；
5、需拥有足够第一年定居加拿大所需的全家生活费用。
7231 机械师和加工检察员 Machinists and machining and tooling inspectors NOC Ｂ
机械师设置和操作各种机床，切割或研磨金属，塑料或其他材料来制作或修改精确尺寸的零件或产品。加工和模具检察员检查加工零件和模具，以保持质量控制标准。他们受雇于机械，设备，汽车，汽车零部件，飞机及其他金属制品制造企业和机器加工车间。
Machinists set up and operate a variety of machine tools to cut or grind metal, plastic or other materials to make or modify parts or products with precise dimensions. Machining and tooling inspectors inspect machined parts and tooling in order to maintain quality control standards. They are employed by machinery, equipment, motor vehicle, automotive parts, aircraft and other metal products manufacturing companies and by machine shops.
7231 机械师和加工检察员头衔范例
汽车机械师 automotive machinist
航空机械师 aviation machinist
总机械师 general machinist
机加工车间巡视员 machine shop inspector
加工零件检查员 machined parts inspector
加工检查员 machining inspector
机械师 machinist
机械师学徒 machinist apprentice
模具检查员 tooling inspector
7231 机械师和加工检察员主要职责
机械师执行部分或全部下列职责Machinists perform some or all of the following duties:
读取和解释工程图纸，蓝图，图表和表格或研究样本零件，以确定要执行的操作加工，并规划最佳的操作顺序
Read and interpret engineering drawings, blueprints, charts and tables or study sample parts to determine machining operation to be performed, and plan best sequence of operations
计算尺寸和公差，测量并给零件置样
Compute dimensions and tolerances and measure and lay out work pieces
设立，运营和维护各种机床，包括电脑数值控制CNC工具来进行高精度，非重复的加工操作，如锯，车，铣，镗，刨，钻，精密磨床等操作
Set up, operate and maintain a variety of machine tools including computer numerically controlled (CNC) tools to perform precision, non-repetitive machining operations such as sawing, turning, milling, boring, planing, drilling, precision grinding and other operations
手工制作并用电动工具调试和组装加工金属零件和子装配
Fit and assemble machined metal parts and subassemblies using hand and power tools
使用精密测量仪器检验各种规格产品尺寸的准确性和一致性
Verify dimensions of products for accuracy and conformance to specifications using precision measuring instruments
可为模具操作员应用的机床设置和编写程序。
May set up and program machine tools for use by machining tool operators.
加工和模具检查员执行部分或全部下列职责Machining and tooling inspectors perform some or all of the following duties:
使用微米，游标尺，卡尺，高度计，光学比较，坐标测量机CMM或其他专门的测量工具，确认加工的零件或模具的尺寸
Verify dimensions of machined parts or tooling using micrometers, verniers, callipers, height gauges, optical comparators, co-ordinate measuring machines (CMM) or other specialized measuring instruments
维护，修理和校准千分表，固定计，高度计和其他测量设备等精密测量仪器
Maintain, repair and calibrate precision measuring instruments such as dial indicators, fixed gauges, height gauges and other measuring devices
从规格公差角度向主管报告偏差
Report deviations from specifications and tolerances to supervisor
完成和维护检验报告。
Complete and maintain inspection reports.
7231 机械师和加工检察员任职要求
通常需要完成中学学业。
Completion of secondary school is usually required.
完成一个为期四年的学徒项目
Completion of a four-year apprenticeship program
或要取得行业认证，通常需要超过四年的行业内工作经验，并且具备加工专业或工科的一些大学课程。
A combination of over four years of work experience in the trade and some college or industry courses in machining is usually required to be eligible for trade certification.
机械师行业认证在所有的省份和地区都可用，但是是自愿考取的。
Trade certification for machinists is available, but voluntary, in all provinces and territories.
在安大略省汽车机械师行业认证可用，但是自愿的，。
Trade certification for automotive machinists is available, but voluntary, in Ontario.
在新不伦瑞克省，魁北克省和马尼托巴省机械师行业认证CNC可用，但是自愿的，。
Trade certification for machinists (CNC) is available, but voluntary, in New Brunswick, Qubec and Manitoba.
加工检察员可能需要是具有多年经验的机械师，工具和模具制造商或加工工具操作员。
Several years of experience as a machinist, tool and die maker or machining tool operator may be required for machining and tooling inspectors.
成功通过跨省的红色钢印的考试的合格的机械师，红色印章有效。
Red Seal endorsement is also available to qualified machinists upon successful completion of the interprovincial Red Seal examination.
7231 机械师和加工检察员附加信息
航空等先进制造业领域的机械师可能需要熟悉奇异的复合材料，。
Familiarity with exotic and composite materials may be required for machinists in aviation and other advanced manufacturing sectors.
红印章代言允许跨省流动。
The Red Seal endorsement allows for interprovincial mobility.
随着经验积累有可能晋升为主管。
Progression to supervisory positions is possible with experience.
7231 机械师和加工检察员其他分类
CAD-CAM程序员工业工程与制造技师和技术员CAD-CAM programmers (in [2233](2233) Industrial engineering and manufacturing technologists and technicians )
承包商和主管，机械加工，金属成型，塑造，成型和装配行业及相关行业 Contractors and supervisors, machining, metal forming, shaping and erecting trades and related occupations [7201](7201)
加工工具运营商 Machining tool operators [9417](9417)
工具和模具制造商 Tool and die makers [7232](7232)
7231 机械师和加工检察员职称头衔
飞机发动机零件机械师 aircraft engine parts machinist
飞机机械师 aircraft machinist
汽车机械师学徒 apprentice automotive machinist
学徒机械师 apprentice machinist
汽车零部件机加工车间检查员 auto parts machine shop inspector
汽车机械师 automotive machinist
航空机械师 aviation machinist
板凳机械师 bench machinist
充电手，机加工车间 charge hand, machine shop
机械师CNC计算机数控 CNC (computer numerical control) machinist
计算机数字控制CNC机械师 computer numerical control (CNC) machinist
计算机辅助机械师 computer-assisted machinist
柴油发动机机械师 diesel engine machinist
差动齿轮检测机械师 differential gear testing machinist
电气机械师 electrical machinist
枪支加工检查员 firearms machining inspector
枪支模型厂商机械师 firearms model maker machinist
齿轮检查机械师 gear inspector-machinist
齿轮检测仪机械师 gear tester-machinist
总机械师 general machinist
检查员，汽车零部件机加工车间 inspector, auto parts machine shop
检察员，枪支加工 inspector, firearms machining
检验员，机加工车间 inspector, machine shop
检验员，机加工零件 inspector, machined parts
检验员，机械加工 inspector, machining
检察员，加工和模具 inspector, machining and tooling
检察员，螺旋桨 - 机械加工 inspector, propellers – machining
检察员，工具和模具 inspector, tool and die
检察员，工装和量具 inspector, tool and gauge
检查员，工装 inspector, tooling
检察员，模具车间 inspector, toolroom
熟练工/女机械师 journeyman/woman machinist
机加工车间充电手 machine shop charge hand
机加工车间巡视员 machine shop inspector
机加工车间检查，汽车配件 machine shop inspector, auto parts
加工零件检察员 machined parts inspector
加工和模具检察员 machining and tooling inspector
加工检查员 machining inspector
加工检查员，枪支 machining inspector, firearms
机械师 machinist
机械师学徒 machinist apprentice
机械师，飞机发动机零部件 machinist, aircraft engine parts
机械师，汽车 machinist, automotive
机械师，弹道实验室 machinist, ballistic laboratory
机械师，板凳 machinist, bench
机械师，CNC电脑数控 machinist, CNC (computer numerical control)
机械师，柴油发动机 machinist, diesel engines
机械师，差动齿轮测试 machinist, differential gear testing
机械师，实验 machinist, experimental
机械师，维护 machinist, maintenance
机械师，模型制作; machinist, model maker
机械师，电影设备 machinist, motion picture equipment
机械师，mouldmaking machinist, mouldmaking
机械师，模具和核心 machinist, moulds and cores
机械师，精度 machinist, precision
机械师，模具车间 machinist, toolroom
维修机械师 maintenance machinist
主机械师 master machinist
模具和核心机械师的 mould and core machinist
模具制造机械师 mouldmaking machinist
NC数字控制机械师 NC (numerically controlled) machinist
精密机械师 precision machinist
印刷机机械师 printing press machinist
螺旋桨检查 - 机械加工 propeller inspector – machining
原型机械师 prototype machinist
设置机械师 set-up machinist
工具和模具检察员 tool and die inspector
工具和压力表检查 tool and gauge inspector
工装检察员 tooling inspector
模具车间检查员 toolroom inspector
模具车间机械师 toolroom machinist
涡轮叶片机械师 turbine blade machinist
加拿大BC省提名技术移民项目（PNP）是由BC省政府和联邦移民部协议共同运作的移民项目，旨在帮助BC省的雇主雇用并保留拥有所需技能的合资格的外国技术工人。
对于雇主：
1、企业必须注册在BC省范围内，经营一年以上并运营良好；
2、企业如位于大温哥华都会地区以内，必须拥有5名或以上的全职员工；
3、企业如位于大温哥华都会地区以外，必须拥有3名或以上的全职员工。
对于申请人要求：
1、必须具备大专以上学历；
2、满足雇主的招聘要求，多年相关行业工作经验；
3、如果雇主的行业需要具备相应的职业证书，则需提供；
4、具备一定的英文能力，雅思成绩须在5分以上；
5、需拥有足够第一年定居加拿大所需的全家生活费用。
移民网(ym16.com)为您提供最全面最新的移民相关知识和政策，帮助您解决移民中遇到的各种疑难杂症。其中《7315 飞机机械师和飞机检查员 Aircraft mechanics and aircraft inspectors NOC》的内容由移民知识小编2022精选编辑整理而成，希望对您的移民有所帮助，欢迎您通过澳大利亚移民条件和费用专题访问更多精彩移民内容。
相关推荐 更多 +
最新更新 更多 +